220V electrical surge protection Single-phase power surge protector
Product Details
This product is designed and manufactured on the basis of IEC and GB standards, and meets IEEE802.3AT requirements. It is suitable for power surge protection in home, third industry and industrial equipment. A lightning protection product is specially developed for equipment surge to avoid overvoltage induced by inductive lightning and electrostatic discharge from the system. Damage. It has the characteristics of low residual pressure level, sensitive reaction, stable performance and reliable operation.
Working principle of product
The function of surge protector is to limit the transient overvoltage to the power line, the signal transmission line in the voltage range that the equipment or system can bear, or to inflow the powerful lightning discharge into the ground, and protect the protected equipment or system from damage by the impact.
Product specification
| Model |
|
TRS4-D10 |
TRS4-D20 |
TRS4-C40 |
TRS4-B60 |
| Rated Operating Voitage |
UC(V) |
320 |
320 |
320 |
320 |
| Voltage protective level |
Up(KV)≤ |
1 |
1.2 |
1.5 |
1.7 |
| Max discharge current |
Imax(8/20μS) |
10 |
20 |
40 |
60 |
|
Nominal discharge current
|
In(8/20μS) |
5 |
10 |
20 |
30 |
| Ressponse time |
NS |
<25 |
| Lndication of invalidation |
Aging invalidation:green Normal,red:Invaldation |
| Operating condition |
Temp:-40℃~+70℃ |
| RH≤95%(25℃) |
| Sea level elevation≤3km |
|
Remote signal function
|
Can also picking |
| Remarks |
Other max continuous operating voltage can be customized |
Product features
1. leakage current is small, the response time is fast, and the residual pressure is low
2. limit the precision of the voltage to say how much!
3. self protection voltage is more than self protection, automatic disconnection and recovery.
4. alarm indicating device, normal (green), red (fault).
Notice of product
1. the energy coordination of multilevel SPD
2. identify the input / output interface identifier of the lightning protector, input the external line and output the connection device.
3. lightning arresters are connected in series between protected equipment
4. it should match the working voltage of the protected equipment. Please install according to the installation sketch.
Company profile
Thor is all about protecting against the damaging effects of power transients. It is our goal and mission to connect our customer challenges with high-quality, right-priced solutions and products – completed by unrivaled customer service and technical support.
Thor is following the international quality system standards, is ISO 9001 certified and our technical standards are in line with GB18802.1-2011/IEC61643-1.
Product packaging:Carton packing
Transportation method
1. Express company: FEDEX,UPS,DHL,TNT
2. Trains, ships, aircraft transport
Product Tags:
|
|
Single Phase Type 2 Surge Protection Device 220V / 320V 40KA Alarm Indicating Images
|
